Så här tar du bort Steam Cloud Sparad

Steam Cloud ger ett enkelt och transparent sätt att spara dina speldata på ett fjärrlagringssystem. Filerna som anges i Auto-Cloud-konfigurationen eller om de skrivs till disken kommer att replikeras automatiskt till Steam-molnservrarna (med Cloud API) efter att spelet existerar.

Detta är särskilt användbart om användaren byter dator. Spelförloppet återupptas antingen av Cloud API eller genom att läsa direkt från disken. Filerna laddas ned automatiskt innan spelet startas eftersom du redan skulle ha angett dina Steam-referenser. Huvuduppgiften för Steam Cloud är att se till att alla filer synkroniseras över alla datorer som en användare använder.

Användare har möjlighet att inaktivera hela molnsynkroniseringen i Steam-inställningarna i klienten. Användare har också flexibiliteten att inaktivera molnsynkroniseringen per spel. Men innan du går vidare med lösningarna, uppdatera Steam-klienten till den senaste versionen.

Vilka är de olika metoderna för att använda Steam Cloud?

Steam erbjuder två olika metoder för att använda Steam Cloud.

Först och främst är Steam Cloud API. Cloud API erbjuder en serie funktioner som låter dig direkt integrera Steam Cloud i ditt spel. Cloud API gör också uppgiften att isolera enskilda Steam-användarfiler från varandra och ger också bättre kontroll över Steam Cloud som helhet.

Den andra är Steam Auto-Cloud. Den här funktionen var främst utformad för äldre spel där det var svårt att använda Cloud API. Det är ett snabbt sätt att komma igång med Steam Cloud men det saknar den flexibilitet och kraft som Steam Cloud API ger.

Det rekommenderas av utvecklarna att använda Cloud API istället för Steam Auto-Cloud eftersom det ger djupare och effektivare integration och anpassning. Det gör att du kan få ut det mesta av Steam-molnet.

Hur löser jag en Steam Cloud-konflikt?

En Steam Cloud-konflikt uppstår när Steam Cloud-innehållet inte matchar dina lokala spelfiler som är lagrade på din hårddisk. Detta kan inträffa på den maskin du använde vid den tiden eller så kan det ha inträffat i en annan maskin tidigare. Eftersom filen modifierades på två olika platser utan synkronisering mellan dem kan Steam inte avgöra vilken fil som ska sparas.

Du kommer troligen att välja filen som modifierades senast. Det betyder att den senaste utvecklingen i ditt spel kommer att sparas. Du bör noggrant inspektera data som förhandsgranskats i fönstret. Granska noggrant datum och tid för sammanhanget och motsvarar detta senast du spelade ett spel på Steam. Detta sammanhang kan hjälpa dig att bestämma vilken version du ska behålla.

Observera att spela spel i offline-läge kommer att hindra dina spel från att synkroniseras och detta är den mest troliga orsaken till Steam Cloud-konflikten.

Vad händer om Steam inte kan synkronisera filer till molnet?

Detta fel indikerar att Steam inte kunde synkronisera dina lokala filer med Steam Cloud. Det kan vara ett tillfälligt problem som Steam Cloud-servrarna kan möta. Du kan kontrollera Steam Cloud-status från Steams webbplats för att säkerställa att problemet är på deras sida.

Om Steam-molntjänsten är igång perfekt betyder det att problemet är i slutet. Du kan kontrollera din Steam-anslutning och felsöka problem. Du kan också kontrollera om du bara har problem med att synkronisera med Steam Cloud.

Om du ignorerar meddelandet och klickar på “Spela spel” kan det orsaka en potentiell konflikt mellan dina lokala filer och Steam Cloud. Det kan också leda till förlorade framsteg och speldata.

Vad händer om jag tappar en fil eller framsteg efter att jag flyttat till en annan dator?

Om du saknar dina senaste framsteg och har kontrollerat att spelet använder Steam Cloud med inställningarna betyder det att Steam inte kunde synkronisera dina data framgångsrikt eller att synkroniseringen resulterade i att dina tidigare data laddades upp till Moln.

Det är möjligt att din originalfil eller framsteg fortfarande finns på den äldre maskinen och inte kunde synkroniseras. Det är möjligt om du startar Steam på den datorn kommer dina framsteg att visas. Om det gör det kommer det automatiskt att uppdateras på alla andra maskiner som är anslutna till ditt Steam-konto.

Dessutom använder många spel inte Steam Cloud-anläggningen. Du kan kontrollera spelets officiella sida om Steam Cloud-support är tillgängligt. Om det inte är det och du inte har tillgång till den äldre maskinen betyder det att dina framsteg går förlorade och att det inte finns något sätt att återställa det.

Hur tar jag bort filer som lagras i Steam Cloud-servrar?

Steam Cloud används för att säkerhetskopiera vart och ett av spelets framsteg så att du inte tappar dina framsteg om du kommer åt spelet från någon annan dator. Du kan bekräfta att dina framsteg sparas av molnet med hjälp av följande metod.

Kontrollera om ditt spel säkerhetskopieras.

  1. Öppna din Steam-klient . Öppna inställningarna genom att trycka på ångknappen i fönstrets övre vänstra hörn och välja alternativet.
  2. Öppna fliken Cloud på vänster sida av skärmen. Kontrollera om alternativet " Aktivera Steam Cloud-synkronisering för de applikationer som stöder det " är markerat.
  3. Klicka sedan på fliken Bibliotek närvarande på Steam-klientens överkant. Här kommer alla dina spel att listas.
  4. Högerklicka på spelet och välj Egenskaper . Navigera sedan till fliken Uppdateringar högst upp i fönstret.
  5. Här längst ner i fönstret ser du ett alternativ “ Aktivera Steam Cloud-synkronisering för [spelets namn] ”. Se till att alternativet är markerat .

Om du har båda alternativen aktiverade betyder det att ditt spel säkerhetskopieras av Steam Cloud och vi kan också ta bort data.

Vad är säkerhetskopieringsmekanismen?

Det första du bör veta är att det finns tre versioner av den sparade speldata

  • Originalversionen lagras i mappen för AppData ( D1 ).
  • Molnversionen lagras på platsen Steam / userdata / SteamID / AppID ( D2 ).
  • Molnversionen lagrad på Steams molnservrar ( D3 ).

Observera anteckningarna (D1, D2, D3) som vi använde eftersom vi kommer att hänvisa till dem mycket i framtiden.

När du startar spelet för första gången skapas D1 automatiskt. När du är klar med att spela spelet uppdateras speldata i D1 och kopieras automatiskt till D2. Efter detta synkroniseras D2 till D3 och laddar upp allt spelinnehåll.

Om du startar ditt spel från en annan dator för första gången, om Steam har D3 på sina servrar men inte upptäcker D2 på datorn, kommer den automatiskt att ladda ner data och kopiera D3 till D2. Steam Cloud hämtar också automatiskt de saknade uppgifterna när du startar Steam.

I ett nötskal är D2 den viktigaste informationen för oss. Om vi ​​kan manipulera det kan vi framgångsrikt radera de data som du vill ta bort.

Obs! Vissa spel har inte D1 och de sparar direkt sina data till D2. Medan vissa spel inte använder D2 som medium och laddar upp data till molnet direkt från D1.

Vad är användardatainnehållet?

I katalogen Steam / userdata ska du ha en mapp som motsvarar ditt SteamID (du kontrollerar vad ditt Steam-ID är genom att läsa vår artikel om det). När du har öppnat den kommer det att skapas mappar för varje spel du spelar. De kommer att identifieras med hjälp av deras AppID (AppID kan enkelt kontrolleras genom att besöka spelet i Steam-butiken och extrahera det från URL: n). I den här spelmappen hittar du två enheter.

  • remotecache.vdf: Den här filen beskriver alla egenskaper för filer som finns i fjärrmappen.
  • Fjärr mapp . Detta innehåller alla filer som synkroniseras med din Steam Cloud-server.

Ta bort data från molnet

I den här metoden kommer vi att följa två viktiga steg. Vi tar först upp Steam Cloud-konfliktmeddelandet och tar sedan bort molnfilerna.

Observera att du måste följa dessa steg spel för spel för att ta bort allt Steam-molninnehåll.

Först måste vi ta bort AppID-mappen från din Steam-katalog. När du har startat om din dator och Steam skapar Steam automatiskt mappen igen. Vi måste utföra detta steg för att säkerställa att Steam Cloud fungerar perfekt och vi kan gå vidare med delningen.

  1. Öppna din Steam-katalog . Standardplatsen för din Steam-installation är
    C: \ Program Files (x86) \ Steam
  2. Search for a folder of AppID and Delete it. Then restart your computer and Steam. Start a game for a few minutes. Make sure that you have a working internet connection.
  3. Navigate back to the Steam directory and check if the AppID folder is back. If it is, it is confirmed that your Steam Cloud is working perfectly and we can proceed with the method.

Bringing Up Steam Cloud Conflict Dialogue

The first part of the solution is probably the most difficult. To delete all your Steam Cloud data, it is necessary to bring the conflict dialogue. Without it is not possible to delete the data present in your Cloud. Steam Cloud conflict occurs when the Cloud files differ from the data present on your hard drive.

There are two methods to bring about this conflict:

Method 1:

  1. Make sure that your Steam Cloud is enabled by following the steps mentioned above. Exit Steam completely by ending all the processes starting with Steamclientbootstrapper using the task manager.
  2. Now will alter all the files in the location
    Steam\userdata\SteamID\AppID\remote

The objective is to make sure that all the files are different from those uploaded to the Steam cloud. We can’t simply delete the files from this location as Steam will automatically notice that the files are missing and download the same ones from the Cloud servers. We can achieve our task by corrupting them and making them 0-byte files.

  1. Navigate to
    Steam\userdata\SteamID\AppID\remote
  2. Now hold shift and right-click on your remote folder. Select the option “Open PowerShell window here”.
  3. You can also open PowerShell when in the folder by clicking the File option present at the top left side of the screen and selecting “Open Windows PowerShell as administrator”.
  4. Once PowerShell is opened, type the exact text written below
clc –path “C:\Program Files (x86)\Steam\userdata\SteamID\AppID\remote\*"

If you fail to write the correct code, you will get an error like this

If you correctly type in the line there will be no confirmatory message and you will get a window like this.

Start your Steam and there will be the conflict windows present on your Steam client.

Method 2:

This is an easier method as compared to the earlier one but it isn’t that efficient.

  1. Open your Steam client. Open its Settings by pressing the Steam button present at the top left corner of the window and selecting the option.
  2. Open the Cloud tab present on the left side of the screen. Uncheck the option “Enable Steam Cloud synchronization for the applications which support it”.
  3. Now navigate to your Stream directory as you did earlier and delete all files present in the folder of AppID. The file path for deletion is
    Steam\userdata\SteamID\AppID.
  4. Now start the game to make new and different files in the file location.
  5. Exit the game and Steam completely by ending all Steam processes in the task manager (end steamclientbootstrapper first).
  6. Now delete the remotecache.vdf file present in the location
    Steam\userdata\SteamID\AppID
  7. Start your Steam.
  8. Head over to the client’s Settings and enable the cloud.

Now a Steam conflict dialogue will come forth and we can proceed with the remaining method.

Deleting Cloud files

Once the Cloud conflict error is forth, don’t click any option and follow the instructions below.

  1. Navigate to the following file path
    Steam\userdata\SteamID\AppID 

    and delete all the files in it. There will be two files (remote folder and remotecache.vdf). Delete both of them.

  2. Now go back to the conflict window and select the option of “Upload to the Steam Cloud”. Now Steam will sync your AppID folder while there will be nothing in it and the previous data on your Steam Cloud will be deleted.
  3. Now the game will start automatically but it will create new files that will be synced to your Steam cloud when you close it. We can prevent it from happening by pressing alt + tab. This will open the open windows on your screen. Select the Steam client from the list of windows.
  4. Once you are in the Steam client, open the client’s Settings. Navigate to the Cloud tab and uncheck the line which enables cloud.
  5. Now return to the game and exit. No files will be synced to your Steam cloud.
  6. Exit Steam and delete the AppID folder as we did before.

How to Make Sure If it Worked?

Remember how we checked at the beginning of this method if the Steam Cloud was running as expected by deleting the AppID folder and checking if it was made again. If there is no file present in the Steam cloud, there will be no file downloaded to your computer.

  1. Enable the Steam cloud as we did in the guide.
  2. Exit Steam completely by using the task manager.
  3. Delete the AppID folder (if you didn’t in step 2).
  4. Now check D3 (these are the cloud files) and compare them with D2 (local files on your computer). If there is nothing in D3, there will be nothing in D2 too!
  5. Check the following directory Steam\userdata\SteamID

No new AppID folder would have been created.

You can also check by logging Steam in on another computer and checking if the files exist.

If you make it till here without any problems, you have successfully deleted all the files on your Steam Cloud.

How to Delete Steam Cloud Saves from OS X

The procedures above can also be replicated on OS X and older Macs to a slight extent. By following the steps below, you will be able to delete your local saves. You can then disable the Steam Cloud synchronization from the Steam application, start a new game and create a few new saves. Then, when you return to re-enable the Steam Cloud synchronization features, the client will ask you which saves do you want to use. You can then choose the new ones which will delete and replace your old saves from the cloud.

To make things even clearer, here’s a step-by-step guide through the whole thing:

  1. Open your Steam application and go to Steam > Settings via the ribbon at the top of the window.
  2. In the settings menu, click on the Cloud tab and uncheck the box associated with Enable Steam Cloud synchronization for applications that support it.
  3. Close Steam completely and open your Finder app.
  4. Go to Library > Application Support > Steam > SteamApps > Common and open the folder of whichever game you want to delete the save files.
  5. Next, open the SAVE folder to reveal the saves of the game.

    Note: If the location specified above doesn’t land you to the save files, try the following locations but mind the placeholders:

    Users / *Your username* /Library / Application Support / *Game Folder* / Game Documents / *Game* / GameSaves Users/ *Your username* / Library / Application Support / Steam / userdata / *GameNumber* / remote Users/ *Your username* / Library / Containers / *Game Folder* / Data /Library / Application Support / *Game* / GameDocuments / *Game* / gamesaves
  6. Once you manage to identify and delete the local saves from the game you’re targeting, open the Game and create a few new saves.
  7. Exit the game, open steam and return to Steam > Settings > Cloud. From the cloud tab, re-enable the checkbox next to Enable Steam Cloud synchronization for applications which support it and click the OK button below.
  8. Steam will ask you whether you want to use the newly created local saves or the ones that you already have on the cloud. Choosing to use the new ones will delete the old saves that you currently have on Steam Cloud.

Rekommenderas

Fix: Minecraft svarar inte
Vad är en ansökan om registrering av digital-TV-mottagare och bör den tas bort?
Vad är FileRepMalware och ska du ta bort det